It's About Time, Since 1979
770-442-9854 Start A Repair
← Back to Watch FAQs

Batteries & Quartz Watches

Does Replacing a Watch Battery Affect Water Resistance?

Replacing the battery itself does not reduce a watch's water resistance, but opening the case can disturb the gasket or seal. After battery service, a water-resistant watch should be properly resealed and pressure tested before you rely on its previous water-resistance rating.

Free Repair Estimate In-House Workshop Johns Creek, GA

Quick Answer

The battery is not what protects a watch from water. The case, crown, crystal, case back, gaskets, and seals do that. The important issue is that a battery replacement requires opening the case, which can disturb a gasket or expose an aging seal.

Until the watch is properly resealed and tested, its previous water-resistance rating should not be treated as confirmed.

Why Can Battery Replacement Affect Water Resistance?

A battery replacement usually requires removing the case back. The gasket that seals that opening may be compressed, dry, worn, damaged, or simply disturbed when the case is opened. Its About Time Inc.'s pressure-testing guide specifically notes that water resistance becomes unverified after case opening until the watch is tested again.

01

The Case Is Opened

The battery cannot usually be changed without opening the case, which means the case-back seal is disturbed during service.

02

The Gasket Is Inspected

A watchmaker checks whether the gasket is seated correctly and whether age, dryness, compression, or damage means it should be replaced.

03

The Case Is Resealed

The case back is closed using the appropriate tools and sealing procedure for the watch.

04

Water Resistance Is Verified

For applicable water-resistant watches, pressure testing verifies whether the sealing system is still functioning before the watch is exposed to water.

Should Every Watch Be Pressure Tested After a Battery Change?

Pressure testing is most important when the watch is water resistant and you intend to rely on that protection. Dive watches, sport watches, luxury watches, and watches regularly exposed to swimming, rain, humidity, or other moisture deserve particular attention.

The site notes that not every low-rated dress watch is necessarily tested in the same way, so the appropriate service depends on the model and how the watch is used.

Pro Tip: If you plan to swim, shower, dive, or regularly expose the watch to water, ask specifically whether pressure testing is included with the battery service. Do not assume a closed case automatically means the original rating has been restored.

What Does a Watchmaker Check During Battery Service?

Its About Time Inc.'s battery-service pages describe checking the case condition, old battery, gasket and seals, correct replacement battery, and watch function. Higher-end and water-resistant watches may also need resealing and pressure testing. The Cartier battery service page shows the same basic sequence for a luxury watch: inspect, open with proper tools, check the old battery, install the correct battery, inspect the gasket, reseal, and test as appropriate.

What Happens If the Watch Fails the Pressure Test?

A failed test means the sealing system is not currently providing the protection expected. Common causes listed on the site include worn or dried gaskets, a case back that is not sealing correctly, or a compromised crown seal.

The problem can then be identified and corrected before water exposure causes condensation, corrosion, dial damage, or movement damage.

Can You Skip Pressure Testing If You Never Get the Watch Wet?

The risk is lower if the watch is never intentionally exposed to water, but moisture can still come from rain, hand washing, humidity, or accidental exposure. More importantly, you should not assume the original water-resistance rating remains valid after a case opening unless it has been verified.

What Is the Safest Way to Replace a Watch Battery?

Use a watch repair shop that does more than simply swap the cell. The safest service checks the old battery, uses the correct replacement, evaluates the gasket, closes the case correctly, and addresses water-resistance testing when appropriate.

You can review the broader watch battery replacement service or start with the watch repair process if you are unsure what your watch needs.

Need an Exact Price?

Let the Workshop Inspect Your Watch

If the answer depends on your watch's condition, movement, age, or previous service, an inspection is the safest way to get an accurate recommendation and estimate.

Explore Watch Battery Service
It's About Time, Since 1979

Certified watchmakers & restorers of fine mechanical timepieces since 1974.

Showroom

11300 Medlock Bridge Rd #300
Johns Creek, GA 30097

Hours

Mon – Sat 10–6
Sun – Closed
Holidays Observed

© 2026 It's About Time, Inc. All rights reserved. Fully insured  ·  Two-year guarantee
It's About Time
Typically replies in minutes
Welcome to It's About Time. How can our watchmakers help you today?